Aqua Tech Electric Blog

The Emergency Disconnect Panel located directly at the equipment area is required in some municipalities whether residential or commercial.  The…

Low Voltage Lighting (14 Volts Or Less) for pools and spas used to be the old style way of doing…

This is the inside of an Aqualink Contoller System for Automated Pool/Spa Controls.  They come in 4 sizes – RS4,…

The Levelor Electronic Water Fill System made by Jandy Corporation is the best way to keep your swimming pool/spa properly…

This is a really nice enclosed equipment area where there was really no place on the property to disguise everything.…

Welcome to the 21st Century!  Today, Automated Controls for swimming pool/spa systems are installed 100% of the time.  Back in…

This is a very important section for electrical installations, repairs and remodels.  For the past 40 years there has not…

These two items have become quite common in the swimming pool industry over the past two decades. Both are electrically controlled…

These are required to connect the PVC pipe from the back of the light Frame (Niche), and green #8 copper…

All electrical outlets for outdoor locations must be rated TR/WR (Tamper Resistant and Weather Resistant) and has these letters easily…

Many times electrical service panels begin to burn from illegal installations called double lugging. Double lugging is where electricians install…

This part of the installation of a pool or spa light is of utmost importance for electrical safety.   Lights come…